Quick Answer: Will A 24v Motor Run On 12v?

Is my trolling motor 12v or 24v?

Electric trolling motors come in three separate power systems: 12, 24 or 36 volts.

To make it easier to understand, a 12-volt trolling motor is run off of one 12-volt deep cycle marine battery.

In order for a 24-volt motor to work, it must be run off of two separate batteries, and a 36-volt version requires three.

Will a 24v trolling motor run on 12v?

Can I run my 24-volt motor off of 12 volts? For a cable steer or hand controlled model this will not hurt the motor, but it will considerably affect the performance of the motor. However, an electric steer motor, such as, the PowerDrive, Terrova, or Ulterra cannot be used on lower voltages.

Can I plug 24v into 12v?

Thank you! Yes, plugging a 12 volt device into a 24 volt supply could very well destroy the 12 volt device. I then ran voltage tests on the battery and discovered it had a voltage of about 13.8 volts because of the constantly connected charger.

How do I know if I have 12v or 24v?

Open the hood and look at the battery. If it has 6 cells it is a 12 volt system, if there are 12 cells (or two 6 cell batteries in series) then it is a 24 volt system. Each cell generates 2 volts.

Does a 24 volt trolling motor need 2 batteries?

24 Volt Systems (2 batteries): 1. Two 12-volt deep cycle batteries are required. 2. Make sure that the trolling motor is switched to the off position or speed selector set to “0”.

What is the advantage of 24 volt or 12 volt?

The reduction in wire size cuts down the costs, as the thicker the wire the more costly it is. Another advantage of 24 volt supplies is that they are more compatible with AC appliances. However, in case you need a 12 volt supply, it is easy to step down the voltage from 24 volts to 12 volts using a charge controller.

Is 12v or 24v inverter better?

You can get much bigger inverters on 24V or 48V than 12V. There are a number advantages in opting for a higher DC supply voltage. 0.5v line drop at 12v = 4.6% supply drop whereas 0.25 v line drop at 24v = 1.04% drop. – Better inverter efficiency and regulation.

What size battery is best for a trolling motor?

Most trolling motor batteries fail due to lack of proper charging. We suggest selecting a 12 volt deep cycle marine battery with at least a 110 amp hour rating, usually a group 27 size battery. The higher the amp hour rating, the more run time you will receive.

What is the best battery to use for a trolling motor?

The VMAX MR127 12 Volt 100Ah AGM is one of the best batteries on the market for use with a trolling motor. It charges quickly, performs well and has a durable exterior that resists vibrations and other potential sources of damage. All in all, this is a very good premium deep cycle battery.

How do I reduce 24v to 12v?

2 Answers. If you need a high-power load resistor, you can get a long length of wire (enamel/transformer wire is best) and put it in a bucket of water. You now have an incredibly high-power resistor. If you want to drop 12V at 5A (probably less due to regulator overhead) then you want a 2.4 Ohm length of wire.

What is the difference between 24v and 48v inverter?

1 Answer. The advantage of 48V over 24V is that only half as much current is required to get the same power. Assuming 95% converter efficiency, for 3Kw output at 24V your battery wiring has to handle 132A! A 24V inverter might be a bit cheaper, but you should consider the cost of replacing your wiring and fuses etc.

Can I use 12v inverter on 24v battery?

Yes, and it is good practise to do so. You charge each 12V battery in turn then use the stored energy to drive your inverter. While the first battery is being discharged, you will be charging the second battery.

What voltage should I charge a 24v battery?

Three Stage Battery Charging

The target voltage for a 24 volt charger for AGM or some flooded batteries is 2.4 to 2.45 volts per cell, which is 28.8 to 29.4 volts.

Can you charge a 12v battery with a 24v charger?

Yes, if you regulate the voltage down to the right amount. If you just plug a 12 volt a battery into a 24 volt charger it will die in a matter of hours.

What is the difference between 12v and 24v battery?

The difference is that both batteries have different voltages which means in a 12 V battery , for every coulomb of charge that flows from battery 12 joule of energy is being used. Similarly, a 24V battery has 720,000C * 24V=17,280,000 W energy stored in it i.e. twice of the energy stored in 12v battery.

What resistor do I need to drop 24v to 12v?

If you want to connect 24V to a LED, there is no need to convert it to 12V. Just a series resistor of 500 0hms or so wll do.